Eye-Eye Turnbuckles
Eye-Eye Turnbuckles
Eye-eye turnbuckles are a three piece assembly that consists of eye end fittings and a turnbuckle body. The turnbuckle body is left hand threaded on one end and right hand threaded at the opposite end. Slack is removed from the rigging assembly and tension is adjusted by turning only the turnbuckle body, drawing both end fittings into the body simultaneously. The turnbuckle fittings are threaded opposite, also. Eye end fittings provide a secure point of attachment to other rigging hardware that can be opened such as jaw ends, clevises, and wire rope eyes.Turnbuckles are not intended for lifting as they are designed to take up slack and apply tension for support or suspension, or to adjust the length of rope, cable, or tie rods. U.S. Federal Specification FF-T-791B provides specifications for eight classes of turnbuckle components including untapped bodies, tapped bodies, stub/stub, eye/eye, hook/hook, jaw/jaw, eye/hook, and eye/jaw. Choose from galvanized steel, die-cast, or corrosion resistant stainless steel.
- Eye end fitting provides secure point of attachment
- Turnbuckle body removes slack and applies tension to an assembly without twisting other rigging components
- Offered in corrosion resistant hot dip galvanized 1045 carbon steel, 304 stainless steel, or die-cast steel
- Huyett turnbuckles are not intended for lifting
- Turnbuckles are designed for straight pull, in-line applications
- Visit our Product FAQs to learn more about Lifting Hardware
