Grooved Clevis Pins
Grooved Clevis Pins for Quick and Easy Three-Point Connections
Grooved clevis pins (also known as grooved clevises) are a unique style of clevis pin with grooves at the end of the shaft; this means that, unlike other variations of this fastener, grooved clevises require mating fasteners that accommodate grooves, like
e-clips and
poodle clips. To use these components together, the pin is inserted through two mating holes that must be aligned and connected (a typical application would be connecting a tractor implement to a tractor). The e-clip, poodle clip, or similar fastener is then attached to the groove in the clevis to prevent the connection from slipping out of place. This makes the whole assembly easy to install and remove.
Grooved clevis pins fall under the general category of
clevis pins, which are reusable, non-threaded industrial fasteners with holes or grooves in the shank. These pins are available in several designs with multiple head and end styles, making them well suited for both temporary and permanent connections where exact alignment isn't required. Often used in three-point fastening systems for agricultural implements, they are ideal for applications such as trailer hitches and removable machinery. These fasteners are easy to install and remove, are cost efficient (especially because they are reusable when kept in good condition), work well under load tension and pulling forces, and can be secured by a range of
hitch pin clips and
cotter pins. When selecting these pins, consider factors like compatibility with mating components, spatial constraints, and environmental conditions that may corrode or damage the pin.
Product Benefits
Grooved clevises offer the following benefits:
- Versatility: The simple design of the groove allows for multiple mating fasteners to provide security.
- Easy Installation and Removal: One of the hallmark benefits of any clevis pin is how simple it is to connect and disconnect, as it does not require any tools and does not create permanent holds.
- Longevity: As long as the pin is cared for and is not damaged or corroded, they are reusable.
Purchase Considerations
Consider the following characteristics of this specific product line before making your purchase:
- Outside Diameter (OD): This pin diameter dimension will help you evaluate whether the pin will fit in the mating holes. Huyett offers this fastener with ODs ranging from 0.188in. - 0.500in. and 6mm. - 12mm.
- Groove Diameter: This groove size dimension will help you narrow down your mating clip. Our pins offer groove diameters from 0.147in. - 0.396in. and 5mm. - 10mm.
- Shank Length: This dimension will allow you to gauge whether the pin is long enough to make the necessary connection. Shank lengths range from 0.500in. - 4.500in. and 20mm. - 70mm.